Friday, December 9, 2011

Arduino Mega and ethernet shield

I bought an Arduino Mega 2560 to reward myself for doing well in a philosophy module.  To connect it to the ethernet shield, the solution in the Arduino forum works - connect pins 11, 12 and 13 on the ethernet shield to 51, 50 and 52  on the Mega (in that order, of course).

Edit: the Mega sorted out the problems I'd been having with getting a web server to read off the SD card - with the Arduino Uno it kept falling over and resetting the board, with the same code on the Mega I was able to run a slow, but quite usable, server.

5 comments:

  1. Hi, i´m having the same problem with Duemilanove.I will change to mega too. Can you share de .ino server and the files that u put in the sd card?

    ReplyDelete
  2. Hey ur work is excellent , I tried it with my mega and w5100 but the things are not working out please guide me with all the information you have... Iam pleasing you a lot... I tried read worked many times forums and hours.... But I failed a lot in this issue couldn't figure out.... So please provide me information , I also maintain a website www.psynce.com u can check my work there!! Thanks a lot in advance!!!

    ReplyDelete
  3. @Rishi, did u get a solution as am having the same problems

    ReplyDelete
  4. can you share me the code to my email plzzz tiru@techinception.com

    ReplyDelete
  5. i am tryig to connect with mega i am getting lot of problem so can u share me the code plzz

    ReplyDelete